(printer friendly)   CHALLENGER PRICING Now you can buy your Challenger airplane in an easy-on-the-pocketbook, 4 part kit, or all at once to save on shipping.  This enables you to become the proud owner of a Challenger on any schedule that fits your budget. Section I- Tail Section Includes all pre-built tail surfaces, covering and hardware to complete the tail section of the Challenger.  Also includes assembly manuals. 1 - place $995.00 2 - place $995.00 1pl Special $995.00* 2pl Special $995.00* 2pl LSS $1085.00* Section II - Wings & Ailerons Includes pre-built wings and ailerons, pre-sewn sailcloth or regular aircraft covering, ribs and hardware to complete the wings and ailerons of the Challenger. 1-place $3,353.00 2-place $4,055.00 1pl Special 3,225.00* 2pl Special $3,897.00* 2pl Special $4,637.00* Section III - Fuselage Includes pre-built fuselage with controls installed, landing gear, sheels, fuel tank, seat and cushions, covering material and all hardware to complete Challenger airframe.* 1-place $5,647.00 2-place $6,945.00 1pl Special $6,775.00* 2pl Special $8,308.00* 2pl Special $9,950.00* TOTAL** $9,995.00 $11,995.00 $10,995.00 $13,200.00 $15,762.00 *Challenger Specials are shorter wing span versions of the standard Challengers sometimes called "clipped Wing Specials".  Clipped wing special fuselages include streamlined strut fairings, 5" wheel pants, flaperons, 10 gal. tank, and complete door kit.  These items are extra cost options on the standard Challengers.  Below are the options and accessories that are currently available. **All aircraft less instruments and paint.  Prices subject to change without notice.   OPTIONS AND ACCESSORIES ENGINE OPTIONS All engine packages include: Engine, carburator (s), exhaust system, muffler mount with hardware, motor mount with all hardware, choke cable(s), cog belt reduction drive, and propeller bolts. (propeller not included) -read specification sheets for performance data Rotax "447" 42 h.p. (2 cyl., single CDI ignition, air cooled) $4,494.00 $_____________ Rotax "503 DC" 52 h.p (2 cyl., dual carb, dual CDI ignition, air cooled) $5,478.00 $_____________ Rotax "582 DC" 65 h.p. (2 cyl., dual carb, dual CDI ignition, liquid cooled) (Less radiator) $7,182.00 $_____________ Sheer Technologies 582 Installation package Includes everything not included in the Challenger kit that is needed to install the 582 in a Challenger. $1085.00 $_____________ Hirth 3203 65 HP (2 cyl., dual carb, dual CDI ignition, air cooled) $6,893.00 $_____________ Hirth 3202 55 HP (2 cyl., dual carb, dual CDI ignition air cooled) $6,173.00 $_____________ Hirth 3503 70 HP (2 cyl., dual carb, dual CDI ignition, liquid cooled) $7,738.00 $_____________ Hirth F-33 28 HP (single cylinder, dual CDI ignition, free air cooled) $3,428.00 $_____________ Hirth fuel injection upgrade $1430.00 $_____________ Hirth electric start upgrade $620.00 $_____________ Hirth oil injection upgrade $232.00 $_____________ Tennessee 2 blade wood prop $455.00 $_____________ Warp Drive 2 blade prop $478.00 $_____________ Warp Drive 3 blade prop $655.00 $_____________ NOTE: Allow 2 to 4 weeks for shipment from factory Sect IV less engine (if you have your own engine) - includes reduction drive, prop, muffler mount, & motor mount,& hdwr $1,450.00 $_____________ NOTE: your Rotax engine must be a provision 8 style OTHER OPTIONS Part 103 legal options package for single place, includes flaperon kit, brake kit, nylon wheels, basic instrument package. $750.00 $_____________ 10 Gal. fuel tank (5 gal. standard)*** add $71.50 $_____________ 17 Gal. fuel tank add $575.00 $_____________ Aluminum Wheels (5" nylon standard)  5" add $25.00 $_____________ Aluminum Wheels (5" nylon standard)  6" add $95.00 $_____________ Fiberglass Wing Tips w/ hdwr, w/Boxed Wing Tip Kit (2P only !!) add $594.00 $_____________ Fiberglass Nose Cone w/hdwr. add $395.00 $_____________ ACCESSORIES Flaperon Kit *** add $148.50 $_____________ Brake Kit add $350.00 $_____________ Hegar hydraulic brakes with 6"spun aluminum wheels. add $750.00 $_____________ Fiberglass Wheel Pant Set (pants for all three wheels w/hdwr)*** - 5" add $325.00 $_____________ Fiberglass Wheel Pant Set (pants for all three wheels w/hdwr)*** - 6" add $396.00 $_____________ Upgrade from 5" WP's to 6" WP's on CW Specials only add $25.00 $_____________ Instrument Package (ASI, ALTIMETER, TACH, CHT, COMPASS) add $875.00 $_____________ Instrument Package for liquid cooled engine (ASI, ALTIMETER, TACH, COOLANT TEMP, COMPASS) add $875.00 $_____________ Instrument Package LSS: (ASI, ALTIMETER, TACH, DUAL EGT, DUAL CHT, COMPASS, SLIP IND, FUEL GAUGE W/SENDER, WIRING, EXTENTION CABLES, AND PANEL) add $1495.00 $_____________ Shoulder Harness add $45.00 per seat $_____________ GPL Electric Start, Challenger Deluxe package add $795.00 $_____________ Quad City Electric Start Package (Rotax 447, 503 only) add $655.00 $_____________ Streamlined Strut Fairing set (wing struts and gear legs)*** add $242.00 $_____________ Fiberglass 3PC. Center Section Cover for 2P (can be modified for 1P) add $373.00 $_____________ 1 place lexan door kit w / wrap around windshield*** add $300.00 $_____________ 2 place lexan door kit w / wrap around windshield*** add $540.00 $_____________ 1 place or 2 place wrap-around windshield ONLY  Please specify here for CLEAR lexan ____ or TINTED lexan ____ add $150.00 $_____________ Plans for cabin heat (NO CHARGE) check here ______ NO CHARGE TOTAL OPTIONS & ACCESSORIES $____________ FLOATS AND OPTIONS   "Puddle Jumper" Floats w/ retractable landing gear (fiberglass). (float options and freight additional, do not include in above total for options) *price varies due to exchange rate from Canada! add $6,000.00 $____________ Kevlar bottoms add $950.00 $_____________ Machined Aluminum Wheels with brakes, tires and tubes add $750.00 $_____________ Color Gel Coat , per color add $160.00 (per color) $_____________ Water Rudders add $430.00 $_____________ Crating and customs fees for float order $260.00 $_____________ TOTAL FLOATS AND OPTIONS $____________ AFTERMARKET OPTIONS AND ACCESORIES   Heater kit for Rotax 503 and 447 $188.00 $______________ Sheer Technologies cabin heater for liquid cooled engines. $575.00 $______________ Sheer Technologies Storage seats. $87.50 each $______________ Sheer Technologies Wing Tanks, 10 gal each, 2 tanks included and all materials for installation are included. $660.00 $______________ Sheer Technologies snow ski set. $500.00 $______________ Mike Harrison Wheel Deal, includes all three aluminum wheels with tires installed, fiberglass landing gear set including axle weldments and cross cable sleeves, and hydraulic brakes. $800.00 $______________ Mike Harrison Instrument panel, many styles to choose from. $150.00 $______________ Grand Total $______________ *** these options and accessories are included with the Special models at no extra cost (printer ready - just click 'print') NO C.O.D.'s Prices subject to change without notice Updated 12/10   History  l  Location  l  Long Wing  l  Clipped Wing  l  Rotax 447 Engine  l  Rotax 503 Engine  l  Options Assembly  l  Repairs  l  Flight Instruction  l  Photo Gallery  l  FAQs  l  Testimonials  l  Site Map  l  l  Contact Us  l  Home HEAVENBOUND AVIATION heavenboundaviation@gmail.com (740-644-4690) Copyright © 2008. HEAVENBOUNDAVIATION.COM  All Rights Reserved